X Shaped In Ground Type Single Post Hydraulic Car Lift 3500kg/1850mm
Features
1. The machine is made of alloy steel. the cylinder is protected by the guiding barrel outside, the and cylinder anti-corrosion and anti-rust, chrome-plated, can be used.
2. It is an electro-hydraulic machine, so it only needs 8L hydraulic oil, which can save the cost.
3. Hydraulic buffering insurance, the electro-hydraulic lifts smoothly, without lift shock, without two side imbalance.
4. It is equipped with mechanical lock and throttle plate. there will be no the risk of vehicle sudden drop, compared to other types lift more secure.
5.The main unit(host body) is underground and the supporting arm is on the ground.
it does not occupy floor space after installation, can improve the utilization rate per unit area, low maintenance and luxurious. maintenance need only replace the seals, very simple.
6. Open space for working.
7. External electric hydraulic control system, easy for maintenance and repairing
8. Internal mechanical hydraulic safe device.
9. Applied to quick repairing, car beauty and wash, tire change. particularly suitable for car wash, especially for vehicle chassis cleaning.
Technical Drawings
Technical Parameters
| Lifting capacity | 3500kg |
| Max Lifting height | 1850mm |
| Host length | 490mm |
| Host width | 490mm |
| Host height | 2514mm |
| N.W. | 750kg |
| Raising/Lowering Time | 40/60sec |
| Load sharing | max. 6:4 in or against drive-on direction |
| Supply voltage | AC380V/50 Hz |
| Power | 2.2 kw |
| Motor speed | 2850rounds /minute |
| Output of oil pump | 1.6ml/round |
| Set pressure of the overflow valve | 18Mpa |
| Pump pressure | 20MPA |
| Working Pressure | 15Mpa |
| Solenoid valve pressure | AC220 V /50 Hz |
| The pressure of the air source | 0.6-0.8MPa(6-8bar) |
| Sound level (measured at control console) | ≤75 dBA |
Detailed Pictures
More Models for option
|
|
In Ground Car Lifts Car Washing Lifter Auto Repairing Lift Single Post Hydraulic Lift 3500kg /1850mm Images
|
